Rolling
Back to the Case Studies homepage
ProblemWrite a program that uses an array to store the results of a simulation with two n-sided dice. At each step in the simulation, “roll” the pair of the dice and use the array to keep track of the number times each of the possible sums has been rolled so far. To store the results of the simulation, you will need an array of length 2n - 1, where n is the number of sides to each die. The following is an example of what an array for two 6-sided dice could look like after a 24-step simulation. 0 1 2 3 4 5 6 7 8 9 10 <-- index ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ | | | | | | | | | | | | | 1 | 3 | 0 | 2 | 3 | 5 | 3 | 4 | 2 | 1 | 0 | <-- value |___|___|___|___|___|___|___|___|___|___|___| Element 0 in our array represents a sum of 2, element 1 represents a sum of 3 and so on. The above array indicates that during the simulation, a sum of 2 (element 0) was rolled once, while a sum of 7 (element 5) was rolled 5 times.
After reading in the input using Scanner, simulate rolling the die by generating two random numbers between 1 and the number of sides (inclusive). After the simulation is complete, print out a histogram displaying the percentage of simulation steps that generated each possible sum.
Sum of 2: ==== (4%) Sum of 3: ============= (13%) Sum of 4: (0%) Sum of 5: ======== (8%) Sum of 6: ============= (13%) Sum of 7: ===================== (21%) Sum of 8: ============= (13%) Sum of 9: ================= (17%) Sum of 10: ======== (8%) Sum of 11: ==== (4%) Sum of 12: (0%) In addition to re-using the printBar method from Nucleotides, your program should consist of the following four methods: public static void initializeArray(int initValue, int[] array)The method initializeArray should set all values in the array to initValue. public static int generateRandomNumber(int maximum)The method generateRandomNumber should use Math.random to generate a random number between 1 and maximum (inclusive). For example, generateRandomNumber(4) should return one of 1, 2, 3, or 4. public static void performSimulation(int numSides, int[] counts, int numSteps)The method performSimulation should call initializeArray to set all values of the counts array to 0 and then execute the simulation. Executing the simulation should consist of repeated calling generateRandomNumber twice (to simulate rolling both dice) and COMP 1010 Fall 2010 Assignment 4 Page 3 of 6 incrementing the appropriate value in the counts array. numSides is the number of sides to the dice. public static void printRollHistogram(int numSides, int[] counts, int numSteps)The printRollHistogram method should print a header line listing the parameters of the simulation (number of sides to the dice and the number of simulation steps) and then print the entire histogram for the given simulation. public static void main(String[] args)Your main method should ask the user for the number of sides to the dice, and then do the following in a loop:
Here is a sample run of the programEnter the number of sides to the dice 8 Enter the number of simulation steps 50 Results of a 50-step simulation with two 8-sided dice: Sum of 2: == (2%) Sum of 3: (0%) Sum of 4: == (2%) Sum of 5: ====== (6%) Sum of 6: ================ (16%) Sum of 7: ======== (8%) Sum of 8: ==== (4%) Sum of 9: ==================== (20%) Sum of 10: ======== (8%) Sum of 11: ======== (8%) Sum of 12: ======== (8%) Sum of 13: ========== (10%) Sum of 14: == (2%) Sum of 15: ==== (4%) Sum of 16: == (2%) Enter the number of simulation steps 600 Results of a 600-step simulation with two 8-sided dice: Sum of 2: == (2%) Sum of 3: ==== (4%) Sum of 4: ======= (7%) Sum of 5: ======= (7%) Sum of 6: ====== (6%) Sum of 7: ========== (10%) Sum of 8: ============ (12%) Sum of 9: ============= (13%) Sum of 10: ========== (10%) Sum of 11: ========== (10%) Sum of 12: ======== (8%) Sum of 13: ===== (5%) Sum of 14: === (3%) Sum of 15: === (3%) Sum of 16: == (2%) Enter the number of simulation steps -1 Programmed by [your name here]. End of Processing. |
Rolling | |
---|---|---|
SolutionStep 1:Understanding an arrayWhat is an array?Before we start writing our program we must first understand an array. An array in java, as well as other programming languages, will become one of your most important tools. An array is used to keep a list of data in a way that we can manipulate them more efficiently. An array will be able to store multiple data items of the same data type (int, string, double, etc.) divided into a fixed number of slots. Here is an example of an array of size 10 (the size we will be using in our program): 0 1 2 3 4 5 6 7 8 9 10 <-- index ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ | | | | | | | | | | | | | | | | | | | | | | | | <-- value |___|___|___|___|___|___|___|___|___|___|___| Each item in the array is called an element, and each element is accessed by a numerical index. Note: The above array has a numerical index from 0 – 9 This is true for all arrays. The first element in the array will always be at index [0] and the last element of the array will always be at index [size_of_array – 1]. Declaring an array:Now that we understand what an array is the next part is to understand how to use one. We must start out by declaring the array. This can be done by first determining which type of data we would like to store in our array (our current program stores values of type “int”). We can then declare our array by writing the type, followed by two brackets [] and finish off with the name of the array. Here is an example of this: int[] arrayName; Initializing an array:Now java knows that arrayName is a variable of datatype of array of int. The next step is to initialize the array. By initializing the array we are now giving the array a fixed size. This can be done at the same time as the declaration or, as we will see in the program we are writing, later in our code. Here is an example of initializing an array of size 10 at both the same time as declaration and later in our code:
Initializing later in our program:
for(int i = 0; i < arrayName.length; i++) { arrayName[i] = 0; }
Step 2:Organizing our codeTo create a solution for this problem we must first start out by separating sections. These sections in java are called "methods". By separating our program into separate parts we can then worry about each section individually. The methods that we are going to want to separate our program into are going to be as followed: Initialize Array Methodpublic static void initializeArray(int initValue, int[] array) This method will be used to initialize the array. To do this you will use a for loop that counts from 0 to the size of the array. Generate Random Number Methodpublic static int generateRandomNumber(int maximum) This method will generate a int between 1 and the and "maximum". This value can be found using Math.round(). Perform Simulation Methodpublic static void performSimulation(int numSides, int[] counts, int numSteps) This method is going to perform our roll simulation. To do this we must remeber three things:
Print Roll Histogram Methodpublic static void printRollHistogram(int numSides, int[] counts, int numSteps) The first thing you need to do is print out a statement that you are starting the Roll Histogram. Once you do, you will then process each array member to pass to the printBar method. An easy way to process through the array would be to use a for-loop. With each data member, you must compare the count to the total count of rolls so you can pass it to the printBar method. MainNow that we have all of our methods we can the begin the process of creating our main method. This should be your last step in programming a program with many different methods. This is where you will use all of your methods that you have created to create your final output. Since we are working with arrays our main program will have to follow the following steps: Declare VariablesLike any program we must first start off by declaring our variables. Here is a list of the variables we will need to declare: int[] rollArray; Scanner myScanner = new Scanner(System.in); int numSides; int numSteps; Retrieving Number of SidesNext, we must retrieve the number of sides. We will do this by first prompting the user to write the number of sides of the dice. Then using a Scanner we will then place the number of sides into the variable numSides. Initializing ArrayAsked talked about earlier in the description of the array it is a good idea to initialize our array to a specified size. Now that we know how many sides are on our dice we can then determine how many values we will need to keep track of. The size of our array will be [size*2 - 1]. Retrieving the Number of StepsAgain, just like in retrieving number of sides, we will prompt the user to enter the number of steps. Than using a Scanner we will then place the number of steps into the variable numSteps. RollingAnd now it is time to make our program do something. | ||
Code |